NO-OX-ID "GG2" Corrosion Resistant Coating, Anti-seize Lubricant
NO-OX-ID "GG-2" is a corrosion resistant coating, anti-seize lubricant that is often used to protect irregular fittings from galvanic corrosion and as a pipe joint thread compound. Non-oxidizing, moisture resistant highly durable soft wax corrosion material that has a high dielectric strength and prevents cross threading, cracking, or metal pipes from corroding. This cold applied compound rust preventative pipe coating and antiseize lubricant is recommended for systems carrying air, steam, gas, ammonia, or water.
The NO-OX-ID GG-2 advantages are:
Contains no solvents perfect for VOC restricted areas.
Does not contain toxic unsafe coal tars
Requires no heating kettles – no fire in ditch.
No primer needed apply directly from can.
Requires NO DRY TIME, can be backfilled immediately after coating and wrapping with NO-OX-ID Pipe Wrap. Lower labor costs!
Foolproof – surface preparation is less critical than for mastic, coal tar or most other coatings – chance of failure is nil.
Can be applied over fittings that have a light oil without hurting performance.
NO-OX-ID GG-2 gives 2 times the coverage of mastics and 3 times the coverage of hot applied coal tars.
Costs of brushes for mastics vs gloves for GG-2 – brushes last 1 or 2 uses then must be replaced, a glove will last 6 months or more – what will be your savings?
Bolts coated with NO-OX-ID can be taken off without torching.
No deteriorating effects on plastic pipe, use on steel tie-ins.
View More
Specifications
Product Category Industrial Lubricants Type Anti-Seize Compound or Thread Lubricant Functions Lubricant; Corrosion Inhibiting or Rust Preventative Composition / Chemistry Synthetic or Semi-syntheti |
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。